Pre-glued Maple/Birch/Oak/Pine/Walnut/Cherry/Ash/Acacia Wood Edge Banding Strip,Iron on Veneer Edging Trim for Furniture Repair

Pre-glued Wood Veneer Edge banding Roll

Size

Width:  1 inch(26mm),3/4 inch(19mm),1-1/2 inch (38mm),1/2 inch(13mm)

Length: 13 feet(4 meters),25 feet(8 meters),50 feet(15 meters)

Package

Packaged in roll,1 package include 1 roll

STRONG HOT MELT ADHESIVE

HIGH QUALITY REAL WOOD VENEER EDGING

Our Pre-finished wood veneer edge banding roll is made of high quality real wood which is durable and elastic, it own a smooth surface and not easy to be dirty. When you repair Furniture and Cabinets, our pre-glued edge banding iron on veneer will be your good choice

HOW TO APPLY

Just secure the plywood wood veneer edging in place, run a heated iron over it, press the it with hand after cooling, and then trim any excess with a utility knife or other tool

EASY APPLICATION

It is pre-glued iron on maple wood edge banding with heat melt adhesive to the back.

Our hot melt adhesive has strong adhesion and it is not easy to bubble or roll up, so it is easy edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts ,Plywood, MDF Board and more.

HOW TO USE

1. Prepare surface edge by filling holes, sanding rough spots, removing sawdust and cutting edging 1/2" longer than covered surface.

2. Apply edging by preheating iron to "cotton" setting, positioning edging and slowly pressing iron over it. Use kraft paper/foil to protect iron bottom. Check glue melting.

3. For bonding, if not hot enough, press veneer firmly with wood block/roller. Reheat and reapply if needed.

4. Trim edge after cooling completely. Use edge trimmer, razor blade or file. Sand smooth and finish as desired.

FINISHED PROJECT

ebpsneer is a professional manufacturer of different kinds of wood veneer and edge banding rolls.

Our wood veneer edging is pre-glued with top-quality hot melt adhesive that provide a strong bond, it also can be remove and reheat. The real maple wood veneer edge banding strips is nice-touched and easy to cut, apply and stain. Simply use household iron, hairdryer with hot wind or edge banding machine to attach. Trimming and sanding as required after the glue turning dry.