Spark Tester Pen Test Car Engine Auto Diagnostic Tool

Ignition TestersSpark Tester:Descriptions:1.Dual Hole TesterThe car spark tester has two testing holes, you can test two spark plugs meanwhile and and if you suspect any spark works improperly you could compare and test to make accurate judgment.2.Wide ApplicationThe car spark tester is used to test spark performance and ignition strength.3. and MaterialThe car spark tester is made of and material, which could help for a long time.4.Portable and Simple OperationThe car spark tester owns a mini size with lightweight, so that you could take it to anyplace with effortless.SpecificationsType: Car Spark TesterQuantity: 1PCMaterial: PlasticColor: Black: EU Input: AC 100-240VOutput: DC 12V 1ASize: 14.5*8.5*4.0cm/5.7*3.3*1.6 (L*W*H)Net Weight: 220.0g/7.8ozAdjustable double hole car spark tester detector Ignition Analyzer Diagnostic ToolCar Spark Tester Detector with Dual Hole Advantage:Dual Hole Car Spark Tester Detector have two testing holes, you can test two spark plugs meanwhile and and if you suspect any spark works improperly you could compare and test to make accurate judgment.Usage: Test spark performance and ignition strengthApplication Range: 12V Gasoline vehicles car spark plugsCar Spark Test principle:In automobile ignition system, the high-voltage ignition coil generates a high-voltage (10000 volts or more), and the spark diverts it formhigh -tension ignition coil into the cylinder engine, spark between the spark electrodes will ignite the mixture. The Detector could tell thegood spark plugs from the bad by the strength of the spark.Car Spark Tester Using Note:1. Please Turn Off Power before you place spark 2. The Spark Tester is a high-voltage detector, so do not touch spark with hand at work to avoid danger.Car Spark Tester User Manual:1.Place the Spark into tester hole 1 or 2; If you want to compare the spark and old one, place spark into hole 1 and the old on into hole 22.Connect to power supply3.Turn the key switch 4 clockwise to turn on tester, indicator 3 will light up, tester is now working at 1000rpm/min.4. Again turn the key switch 4 clockwise,you can adjust the working frequency between 1000rpm to 5000rpm/min.The higher the frequency, the stronger the spark strength.Product Parameters:Main Unit Size:145*85*60mmMain Unit Weight:220G( Not including Power Adapter)Power Adapter: Input 100-240V AC / Output 12V 1A DC==========High-concerned chemical : NoneUse : Not TelecommunicationIs Batteries Included : NoOrigin : Mainland

• Ignition Testers
• Spark Tester Pen Test Car Engine Auto Diagnostic Tool